Prøvetagning & håndtering

Standard Test Methods for Reserve Alkalinity of Engine Coolants and Antirusts

Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids

Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes

ASTM-praksis for prøvetagning af motorkølervæsker og rusthæmmere og for at fremstille vandige opløsninger af kendt koncentration til efterfølgende analyse.

Standard Test Methods for Silicone Liquids Used for Electrical Insulation

Standard Test Method for 2,6-di-tert-Butyl-p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption

Standard Test Method for Engine Coolants by Engine Dynamometer

Standard Practice for Testing Engine Coolants in Car and Light Truck Service

Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils

Standard Specification for Mineral Insulating Liquid Used in Electrical Apparatus

Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography

Standard Practice for Manual Sampling of Petroleum and Petroleum Products

ASTM/API-praksis for manuel prøvetagning af flydende råolie og olieprodukter — sådan udtages en repræsentativ prøve i den primære beholder.

Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants

Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication

Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines

Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines

ASTM-praksis for overvågning af mineralske turbineolier i drift i damp-, gas- og kombikraftværksturbiner til elproduktion.

Standard Specification for Silicone Liquid Used for Electrical Insulation

Standard Guide for Sample Chain-of-Custody Procedures

Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils

Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy

Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

ASTM-praksis for overvågning af smøreolier i drift i hjælpeudstyr på kraftværker uden for selve turbinen.

Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants

Standard Specification for Engine Coolant Grade Glycerin

Standard Guide for Practical Lubricant Condition Data Trend Analysis

Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters

Standard Practice for Obtaining In-Service Samples of Lubricating Grease

ASTM-praksissen for at udtage trendbare driftsprøver af fedt fra lejer, gearkasser, motorer og åbne gear.

Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination

Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing

Standard Guide for Sampling, In-Service Lubricating Oils and Hydraulic Fluids in Industrial Applications

ASTM-vejledningen i at udtage repræsentative driftsprøver fra turbiners smøre-, tætningsolie- og hydrauliske styresystemer.

Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants

Standard Practices for Sampling Electrical Insulating Liquids

Den nordamerikanske praksis for at udtage repræsentative prøver af isolationsvæsker fra transformere, afbrydere, kabler og bulkbeholdere.

The Condition of Solid Transformer Insulation at End-of-Life

Maintenance for HV Cables and Accessories

Moisture Equilibrium and Moisture Migration within Transformer Insulation Systems

Remaining Life Management of Existing AC Underground Lines

DGA in Non-Mineral Insulating Liquids

Furanic Compounds for Diagnosis

Condition Assessment for Fluid-Filled Insulation in AC Cables

Guide on Transformer Intelligent Condition Monitoring (TICM) Systems

Transformer Post-Mortem Analysis

Moisture measurement and assessment in transformer insulation

Transformer Bushing Reliability

Repræsentativ prøvetagning — Horisontal standard (Representative sampling — Horizontal standard)

Fluids for Electrotechnical Applications — Mineral Insulating Oils

Specifikation for ubrugte mineralolier. Reference-baseline for nyolie- og post-behandlings-acceptprøvning.

Mineral insulating oils in electrical equipment — Supervision and maintenance guidance

Kategoriserer in-service mineraloliekvalitet via farve, vand, IFT, BDV, syretal og DDF. Driver vores tilstandsvurderings-tærskler og trending-rapporter.

Method of Sampling Insulating Liquids

IEC-standard, der fastlægger, hvordan isolationsvæsker udtages fra leveringsbeholdere og oliefyldt udstyr, så analysen bliver gyldig.

Oil-filled electrical equipment - Sampling of free gases and analysis of free and dissolved gases in mineral oils and other insulating liquids - Guidance

IEC-standard for, hvordan frie og opløste gasser opsamles og analyseres i mineralolier og andre isolationsvæsker som grundlag for DGA.

Specifications for Unused Silicone Insulating Liquids

Guide for the Maintenance of Silicone Transformer Liquids

Specifications for Unused Synthetic Organic Esters for Electrical Purposes

IEC-specifikationen med acceptkrav og prøvningsmetoder for ubrugte syntetiske organiske estervæsker til isolation.

Insulating Liquids — Determination of Dielectric Dissipation Factor

Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment

IEC-specifikationen for kvalitetskrav og prøvningsmetoder for ubrugte naturestervæsker til transformere.

Guidance on Interpretation of CO2 and 2-Furfuraldehyde as Markers of Paper Thermal Degradation

Natural Esters — Guidelines for Maintenance and Use in Electrical Equipment

Vejledning i vedligeholdelse og overvågning af naturestervæsker i lukkede transformere og elektrisk udstyr.

IEEE Guide for the Use of Gas-in-Fluid Analysis for Paper and Laminated Paper-Polypropylene Insulated Cable Systems

IEEE Guide for the Evaluation of the Remaining Life of Impregnated Paper-Insulated Transmission Cable Systems

IEEE Guide for Acceptance and Maintenance of Insulating Mineral Oil in Electrical Equipment

IEEE's vejledning for accept og vedligehold af mineralsk isolerolie i elektrisk udstyr. Krydsrefereret hvor IEC 60422 anvendes.

IEEE Guide for Acceptance of Silicone Insulating Fluid and Its Maintenance in Transformers

IEEE-vejledning om modtagekontrol af silikonevæske (polydimethylsiloxan) til transformere og om at vedligeholde dens egenskaber i drift.

IEEE Guide for Interpretation of Gases Generated in Silicone-Immersed Transformers

IEEE Guide for Acceptance and Maintenance of Natural Ester Insulating Liquid in Transformers

IEEE-vejledning i acceptprøvning og vedligeholdelse i drift af naturestervæske i transformere.

Dissolved Gas Analysis — It Can Save Your Transformer

Calculation of DGA Limit Values and Sampling Intervals in Transformers in Service

Guidance for in-servicing of lubricating oils for steam, gas and combined cycle turbines

Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU

Petroleum Products — Determination of Electrical Conductivity

Lubricants — Family H (Hydraulic) — Specifications for HETG, HEPG, HEES, HEPR

Lubricants — Family T (Turbines) — Specification for Turbine Bearing Oils