TriboTech ApS
Expert Tribology Consultancy
Loading...
Loading...
How a representative oil or liquid sample is drawn, contained and transported — the step every downstream analysis depends on. Covers sampling of liquids and dissolved gases from in-service equipment.
66 standards
Standard Test Methods for Reserve Alkalinity of Engine Coolants and Antirusts
Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids
Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
ASTM practice for sampling engine coolants and antirusts and preparing aqueous solutions of known concentration for downstream testing.
Standard Test Methods for Silicone Liquids Used for Electrical Insulation
Standard Test Method for 2,6-di-tert-Butyl-p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
Standard Test Method for Engine Coolants by Engine Dynamometer
Standard Practice for Testing Engine Coolants in Car and Light Truck Service
Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
Standard Specification for Mineral Insulating Liquid Used in Electrical Apparatus
Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM/API practice for manual sampling of liquid petroleum and petroleum products — how to draw a representative sample into the primary container.
Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication
Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines
Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
ASTM practice for in-service monitoring of mineral turbine oils in steam, gas, and combined-cycle power-generation turbines.
Standard Specification for Silicone Liquid Used for Electrical Insulation
Standard Guide for Sample Chain-of-Custody Procedures
Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
ASTM practice for in-service monitoring of lubricating oils in auxiliary, non-turbine power-plant equipment.
Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
Standard Specification for Engine Coolant Grade Glycerin
Standard Guide for Practical Lubricant Condition Data Trend Analysis
Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
Standard Practice for Obtaining In-Service Samples of Lubricating Grease
The ASTM practice for taking trendable in-service grease samples from bearings, gearboxes, motors and open gears.
Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing
Standard Guide for Sampling, In-Service Lubricating Oils and Hydraulic Fluids in Industrial Applications
The ASTM guide for taking representative in-service samples from turbine lubrication, seal-oil and hydraulic control systems.
Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
Standard Practices for Sampling Electrical Insulating Liquids
The North American practice for drawing representative samples of insulating liquids from transformers, breakers, cables and bulk containers.
The Condition of Solid Transformer Insulation at End-of-Life
Maintenance for HV Cables and Accessories
Moisture Equilibrium and Moisture Migration within Transformer Insulation Systems
Remaining Life Management of Existing AC Underground Lines
DGA in Non-Mineral Insulating Liquids
Furanic Compounds for Diagnosis
Condition Assessment for Fluid-Filled Insulation in AC Cables
Guide on Transformer Intelligent Condition Monitoring (TICM) Systems
Transformer Post-Mortem Analysis
Moisture measurement and assessment in transformer insulation
Transformer Bushing Reliability
Repræsentativ prøvetagning — Horisontal standard (Representative sampling — Horizontal standard)
Fluids for Electrotechnical Applications — Mineral Insulating Oils
Specification for unused mineral insulating oils. Reference baseline for new-oil and post-treatment acceptance testing.
Mineral insulating oils in electrical equipment — Supervision and maintenance guidance
Categorises in-service mineral oil quality by colour, water, IFT, BDV, acidity and DDF. Drives our condition-assessment thresholds and trending reports.
Method of Sampling Insulating Liquids
IEC standard defining how insulating liquids are sampled from delivery containers and oil-filled equipment for valid analysis.
Oil-filled electrical equipment - Sampling of free gases and analysis of free and dissolved gases in mineral oils and other insulating liquids - Guidance
IEC standard guiding how free and dissolved gases are collected and analysed from mineral oils and other insulating liquids for DGA.
Specifications for Unused Silicone Insulating Liquids
Guide for the Maintenance of Silicone Transformer Liquids
Specifications for Unused Synthetic Organic Esters for Electrical Purposes
The IEC specification setting acceptance requirements and test methods for unused synthetic organic ester insulating fluids.
Insulating Liquids — Determination of Dielectric Dissipation Factor
Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment
The IEC specification defining quality requirements and test methods for unused natural ester insulating fluids in transformers.
Guidance on Interpretation of CO2 and 2-Furfuraldehyde as Markers of Paper Thermal Degradation
Natural Esters — Guidelines for Maintenance and Use in Electrical Equipment
Maintenance and supervision guidance for natural ester insulating liquids in sealed transformers and electrical equipment.
IEEE Guide for the Use of Gas-in-Fluid Analysis for Paper and Laminated Paper-Polypropylene Insulated Cable Systems
IEEE Guide for the Evaluation of the Remaining Life of Impregnated Paper-Insulated Transmission Cable Systems
IEEE Guide for Acceptance and Maintenance of Insulating Mineral Oil in Electrical Equipment
IEEE's guide for acceptance and maintenance of insulating mineral oil in electrical equipment. Cross-referenced wherever IEC 60422 is applied.
IEEE Guide for Acceptance of Silicone Insulating Fluid and Its Maintenance in Transformers
IEEE guide for accepting silicone (polydimethylsiloxane) transformer fluid on delivery and maintaining its properties in service.
IEEE Guide for Interpretation of Gases Generated in Silicone-Immersed Transformers
IEEE Guide for Acceptance and Maintenance of Natural Ester Insulating Liquid in Transformers
IEEE guide for acceptance testing and in-service maintenance of natural ester insulating liquid in transformers.
Dissolved Gas Analysis — It Can Save Your Transformer
Calculation of DGA Limit Values and Sampling Intervals in Transformers in Service
Guidance for in-servicing of lubricating oils for steam, gas and combined cycle turbines
Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
Petroleum Products — Determination of Electrical Conductivity
Lubricants — Family H (Hydraulic) — Specifications for HETG, HEPG, HEES, HEPR
Lubricants — Family T (Turbines) — Specification for Turbine Bearing Oils